![background image](http://html1.mh-extra.com/html/ryobi/oht1850h/oht1850h_original-instructions-manual_1506969006.webp)
4
| English
■
Cover the blade
with the blade protector before storing
the product, or during transportation.
■
For transportation in a vehicle,
secure the product
against movement or falling to prevent injury to persons
or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, contribute to poor performance,
and may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a quali
fi
ed service
technician. For service, bring the product to an
authorised service centre. When servicing, use only
identical replacement parts.
WARNING
The blades are extremely sharp. To prevent personal
injury, exercise extreme caution when cleaning,
lubricating, and
fi
tting or removing the blade protector.
■
Ensure the battery is disconnected and the
supply cord is disconnected from the supply
before performing any maintenance, cleaning, or
adjustments.
■
You may only make adjustments and repairs
described in this manual. For other repairs, contact
an authorised service agent.
■
After each use, clean the body and handles of the
product with a soft, dry cloth.
■
After each use, clean the debris from the blades
with a stiff brush, and then carefully apply a rust
preventative lubricant before refitting the blade
protector. The manufacturer recommends you to use
a rust-preventative lubricant spray to apply an even
distribution and reduce the risk of personal injury
from contact with the blades. For information about
suitable spray product, check with an authorised
service centre.
■
Lubricate the blades lightly before use if necessary
using the above method.
■
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should
be properly repaired or replaced by an authorised
service centre.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■
injury caused by the blade
–
The blade cannot be guarded while cutting. Keep
the blade away from yourself and others. Cover it
with the blade protector when the product is not in
use.
■
injury caused by vibration
–
Always use the right tool for the job, use designated
handles, and restrict working time and exposure.
■
hearing injury caused by exposure to noise
–
Wear ear protection and limit exposure.
RISK REDUCTION
I
t has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud’s Syndrome.
Symptoms may include tingling, numbness, and blanching
of the
fi
ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■
Keep your body warm in cold weather. When
operating the unit, wear gloves to keep the hands
and wrists warm. It is reported that cold weather is
a major factor contributing to Raynaud’s Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 144.
1. Trigger
2. Cord hook
3. Rear handle
4. Front handle
5. Operator presence switch
Summary of Contents for OHT1850H
