Ryobi HP64L, Operator'S Manual

Page: 6 / 20

6 — English
OPERATION
DRIVING OR REMOVING SCREWS
See Figure 6, page 8.
WARNING:
Do not drive a screw where there is likely to be hidden
wiring behind the surface. Contact with a “live” wire will
make exposed metal parts of the tool “live” and shock
the operator. If you must drive a screw where hidden wire
may be present, always hold tool by insulated gripping
surfaces (handle) when performing the operation to
prevent a shock to the operator.
NOTICE:
The driver is not designed to be used as a drill.
 Place the direction of rotation selector in the correct posi-
tion for the operation.

Secure the material to be driven to keep it from turning
as the screwdriver bit rotates.

Hold the driver with one hand.

Place the bit on the screw head and depress the switch
trigger.

Move the screwdriver bit toward the material. Do not force
the driver. Let the tool do the work.
NOTE: Maintenance information begins on page 7 after French
and Spanish language sections. Figures (Illustrations) start on page 8.
This product has a Three-year Limited Warranty.
For Warranty details go to www.ryobitools.com