![background image](http://html.mh-extra.com/html/ryobi/hp52l/hp52l_operators-manual_1505665006.webp)
6 — English
FEATURES
PRODUCT SPECIFICATIONS
Motor ........................................................................4 V DC
Switch ..................................................... On-Off/Reversible
No Load Speed .................................200/600 r/min. (RPM)
Clutch .............................................................. 24 Positions
Torque ..................................................................... 36 in. lb
Collet ........................................SPE™ SYSTEM
kNOw yOUR SCREwDRIVER
See Figure 1, page 9.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BATTERy CAP RETAINER
The battery cap retainer keeps the cap attached to the
screwdriver to help prevent losing the cap.
DIRECTION OF ROTATION SELECTOR
(FORwARD/REVERSE/CENTER LOCk)
Your screwdriver has a direction of rotation (forward/
reverse/center lock) selector located above the switch trigger
for changing the direction of bit rotation. Setting the switch
trigger in the
OFF
(center lock) position helps reduce the
possibility of accidental starting when not in use.
LED wORkLIGHT
The screwdriver has a built-in LED worklight that illuminates
when the switch trigger is depressed. This feature is conve-
nient when working in close or tight areas where additional
light is needed.
SPE™ SySTEM
Your screwdriver has the SPEEDLOAD +™ SYSTEM, the
fastest and most convenient way to change any 1/4 in. hex
shank bits.
TORQUE ADJUSTMENT RING
Your screwdriver has a 24-position clutch. The torque
adjustment ring can be turned to select the right amount of
torque for the application.
TwO-SPEED GEAR TRAIN
The two-speed gear train is designed for drilling or driving
at
LO
or
HI
speeds. A slide switch is located on top of your
screwdriver for selecting either
LO
or
HI
speed.
ASSEMBLy
UNPACkING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
wARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACkING LIST
4V Screwdriver
Bit set
Operator’s Manual
wARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
wARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
wARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.