![background image](http://html1.mh-extra.com/html/ryobi/etms-1425/etms-1425_user-manual_1506473020.webp)
OPERATION (FIG. 1-9)
■
Switch on the saw.
■
Press the workpiece firmly against the stop rail (27)
and slowly slide it together with the cross stop (18)
against the blade (5) in order to make the cut.
■
When the cut is completed, switch off the saw.
Using as a mitre saw (Fig. 1-3, 10-13)
Convert the saw to mitre saw mode.
Settings (Fig. 1-3)
■
The machine head can be tilted a maximum of 45° to
the left by undoing the bevel lock knob (22).
■
The turntable (8) can be adjusted from -45° to +45°
by undoing the mitre lock knob (10).
On/Off switch (Fig. 1)
The saw is started by pressing the On/Off switch (3).
The switch has to be kept pressed while making the cut.
90° cross-cuts and 0° turntable (Fig. 10)
■
Convert the saw from table saw mode to mitre
saw mode.
■
Place the workpiece on the lower saw table (9) and
press it against the stop rail with your left hand.
Always position the material firmly on the machine
table so that it cannot move about while it is being cut.
■
Press the main switch (3) to turn on the saw.
■
Wait for the blade to reach its maximum speed before
starting the cut.
■
With the other hand, press the release button (1) and
lower the machine head by its handle (2) smoothly
and with slight pressure down through the workpiece
to make the cut.
■
When the cut is completed, return the machine to its
top parking position and let go of the On/Off switch.
CAUTION
A return spring causes the machine head to rise
automatically at the end of the cut. Do not let go of
the handle (2) as soon as the cut is completed but
steady the machine head and allow it to rise slowly.
90° cross-cuts and 0°-45° turntable (Fig. 11)
You can use the saw to make angled cuts of 0° to 45°
relative to the stop rail on the left and right side.
■
Release the turntable (8) by slackening the mitre lock
knob (10) and pressing the catch (14).
■
Set the turntable (8) to the required angle by means
of the handle (2).
■
Re-tighten the mitre lock knob (10) to fasten the
turntable (8).
Mitre cuts 0°-45° and turntable 0° (Fig. 12)
You can use the saw to make left mitre cuts of 0° to 45°
relative to the work surface.
■
Lift the machine head to its top position.
■
Fix the turntable (8) in 0° position.
■
Undo the bevel lock knob (22) and tilt the machine
head by its handle (2) to the left until the mark (a)
on the machine head points to the required angle
dimension (b).
■
Re-tighten the bevel lock knob (22) make the cut.
Mitre cuts 0°-45° and turntable 0°-45° (Fig. 11/13)
You can use the saw to make left miter cuts of 0° to 45°
relative to the work surface and 0° to 45° relative to the
stop rail simultaneously (compound miter cuts).
■
Lift the machine head to its top position.
■
Release the turntable (8) by slackening the mitre lock
knob (10) and pressing the catch (14).
■
Adjust the turntable (8) by its handle (2) to the
required angle.
■
Re-tighten the mitre lock knob (10) to fasten the
turntable.
■
Undo the bevel lock knob (22) and tilt the machine
head by its handle (2) to the left to the required angle
dimension.
■
Re-tighten the bevel lock knob (22).
Chip extractor (Fig. 3)
The saw is equipped with a vacuum extraction socket
(31) for chips and dust.
It is easy therefore to connect the machine to a dust
extraction system.
REPLACING THE SAW BLADE (FIG. 14-19)
■
Pull out the power plug. The blade must stop moving
completely.
■
Set the saw to table mode.
■
Slacken the two Allen screws (38) and take off the
splitter (30) together with the upper blade guard (17).
■
Take out the recessed head screw (33) and the table
insert (34).
14
GB
F
D
E
English
I
P
NL
S
DK
N
FIN
GR
H
CZ
RUS
RO
PL
ETMS-1425 manual 5/07/04 15:34 Page 14
Summary of Contents for ETMS-1425
Page 2: ...Fig 1 Fig 2 27 28 25 18 29 21 19 8 32 20 7 16 17 33 1 15 6 10 14 12 11 9 35 4 2 37 3...
Page 3: ...Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 30 31 36 22 23 24 28 26 25 a b 3 5mm 30 15 6...
Page 4: ...Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 26 28 25 27 18 17 16 b a 40 40 39 38...
Page 5: ...Fig 15 Fig 16 Fig 17 Fig 18 Fig 19 17 33 34 30 21 39 19 5 39...