REPLACING THE SAW BLADE (FIG. 14)
■
Unscrew the recessed head screws (40) in the
removable blade guard (39).
Important: Do NOT
unscrew the middle recessed head screw (41).
■
Swing down the soleplate (Fig. 17).
■
Use the supplied face wrench (21) to lock the outer
flange in place and use the socket wrench (19)
to unscrew the hex screw. (
Important: Lefthand
thread. Unscrew clockwise!
)
■
Take the saw blade (5) off the inner flange and lift up
and out through the slot in the saw table (16).
■
Thoroughly clean the outer and inner flange and the
motor shaft before inserting and securing the
new blade.
IMPORTANT
The cutting bevel of the teeth, i.e. the direction of
rotation of the saw blade, has to conform with the
direction of the arrow marked on the housing.
■
Re-mount the table insert (34), the splitter (30)
and the blade guard (17) and secure in place.
■
When fastening the splitter (30) make sure that the
distance between the teeth of the blade and the
splitter is a minimum 2 mm and a maximum 5 mm
(Fig. 8).
■
Swing up the blade guard again and screw it securely
in place.
■
Before using the saw again, check that the safety
devices are in good working order.
MAINTENANCE
■
Keep the machine’s air vents unclogged and clean
at all times.
■
Remove dust and dirt regularly from the machine.
Cleaning is best done with compressed air or a rag.
■
Re-lubricate all moving parts in regular intervals.
■
Never use caustic agents to clean plastic parts.
15
GB
F
D
E
English
I
P
NL
S
DK
N
FIN
GR
H
CZ
RUS
RO
PL
ETMS-1425 manual 5/07/04 15:34 Page 15
Summary of Contents for ETMS-1425
Page 2: ...Fig 1 Fig 2 27 28 25 18 29 21 19 8 32 20 7 16 17 33 1 15 6 10 14 12 11 9 35 4 2 37 3...
Page 3: ...Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 30 31 36 22 23 24 28 26 25 a b 3 5mm 30 15 6...
Page 4: ...Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 26 28 25 27 18 17 16 b a 40 40 39 38...
Page 5: ...Fig 15 Fig 16 Fig 17 Fig 18 Fig 19 17 33 34 30 21 39 19 5 39...
