Two danger symbols are used throughout this document.
Caution: Risk of electrical shock
Caution: Dangerous area.
Warning: Refer to accompanying documentation.
This section contains safety information which must be observed
strictly when using this device.
IT IS IN YOUR OWN INTERESTS TO PAY ATTENTION TO ALL WARNINGS on the
unit and in this manual.
Target audience
People working with the device must read the sections which are relevant to
their work. This applies especially to the chapter entitled “Safety information”.
Duty of observation with respect to product
The operator must report all operational irregularities or changes to componen-
ts which are relevant to device safety immediately to the responsible supervisor
or the manufacturer.
Location of operating instructions
We recommend storing these operating instructions near the device to ensure
quick access by operating staff.
Legal provisions
National and local safety and accident prevention regulations which are in force
must be strictly observed in addition to the operational guidelines issued by the
operating entity.
Do not make any technical modifications to the device under
any circumstances!
Refer to specifications in “Technical Data” section for binding operational
limits.
DO NOT USE this unit near water or in any area with excessive moisture.
WARNING: In order to prevent electric shock, do not expose this appliance to
rain or high humidity.
NEVER SPILL LIQUID ON THE UNIT OR INSERT OBJECTS INTO THE UNIT! This
could result in electric shock or damage to the unit.
DO NOT PLACE FLAMMABLE MATERIALS on or near the unit at any time. Keep
unit AWAY from other sources of HEAT. The device has not been approved for
operation in areas subject to explosion hazards!
The device may only be operated using the mains voltage indicated.
NEVER OPEN THE APPLIANCE OR ANY COMPONENTS, unless instructed
expressly to do so by these instructions.
Never look directly at the LEDs when switched-on, otherwise you risk
eye injuries.
Cleaning
Disconnect unit from the mains power supply before cleaning and only clean
with a damp cloth. Never use combustible or flammable liquids. If fluids acci-
dentally enter the device, unplug the mains cable and let the unit dry thoroughly
before using again.
Spare parts
Use only original spare parts. If this is not done, it can lead to personal injury
and material damage. Refer to “Spare Parts” section for component codes.
Responsibility
As the ultimate legal entity, the operating institution is responsible for ensuring
the proper use of the device and for providing other operators with the necessary
information and it specifies the competencies required to operate the device.
DISCONNECT THE MAINS CABLE when the unit is not being used for an extended
period of time.
ONLY USE THE ORIGINAL MAINS CABLE. Route cable so that it cannot be jammed
or severed.
FOR REASONS OF SAFETY only use the grounded 3-pin plug.
Repairs which are not described in this document must only be carried out by
authorized workshops!
The manufacturer is not liable for any damage resulting from a failure to comply
with the above instructions!
Current technology
Photonic LED illumination devices constitute state-of-the-art technology and
employ recognized safety standards.
This instrument was designed and built in accordance with the following
regulations and standards:
T
EEC/89/336: Electromagnetic compatibility (CE)
T
ISO 9001/2: Quality systems for development and production
SAFETY INFORMATION
