Page 15
Victrix 24kW X Instructions
Operation and Maintenance Instructions
An annual maintenance of the boiler and heating system is recommended. This ensures that the optimal
safety, performance and operation characteristics of the boiler remain unchanged over time.
Warnings
Never expose the wall-mounted boiler to direct vapours from a cooking surface. Use of the boiler by un-
skilled persons or children is strictly prohibited.
Never touch the flue extraction terminal (if fitted) due to the risk of burning caused by high temperatures;
For safety purposes, check that the concentric air intake/flue exhaust terminal (if fitted), is not blocked. If
temporary shutdown of the boiler is required, proceed as follows:
a) drain the heating system if anti-freeze is not used;
b) shut off all electrical, water and gas supplies.
When building or renovation work is carried out in the vicinity of the flue outlet, switch off the boiler and on
completion of work ensure that a qualified technician checks the safety of the installation. Never clean the
appliance or connected parts with flammable substances. Never leave containers or flammable substances
in the same environment as the appliance.
Electrical Safety
- never touch the appliance with wet hands or other parts of the body and never touch when barefoot.
- never pull electrical cables or leave the appliance exposed to atmospheric agents (rain, sunlight, etc.);
- the appliance power supply cable must never be replaced by the user;
- in the event of damage to the cable, switch off the appliance and contact a qualified service technician.
- in the event of prolonged periods when the boiler is not in use, turn off the main power switch.
1. Boiler status indicator display
2. Stand by—Domestic/Remote control—
Domestic and Heating—Reset Selector
3. Domestic hot water temperature selector
4. Heating temperature selector
5. Boiler manometer
Using the Boiler
Before lighting, make sure that the system is full of water and that the manometer (5) indicates a pressure of
1 - 1.2 bar.
-Open the gas valve on the gas supply to the boiler.
-Turn main selector (2) to Domestic/Remote Friend Control or Domestic and Heating
N.B.
With the switch (2) set to the heating adjustment selector (4) is cut out, the domestic hot water
temperature is regulated by selector (3): the display shows the Summer symbol . With the selector set to
the heating adjustment selector (4) is used to regulate the temperature of radiators while selector (3)
continues to be used for domestic hot water; the display shows the Winter symbol
Turn the selectors clockwise to raise the temperature, anticlockwise to lower it. Boiler operation is now
automatic.