Tighten the thumbscrew to secure the camera, but only
tight enough that the camera can slide forward and
backward along the slot.
Move the tilt plate to the horizontal position, and slide the
camera forward and back while gently tilting the plate in
both directions. You want to find the best center of gravity
for the camera and lens … then tighten the thumbscrew,
applying as much pressure with your fingers as possible to
assure a solid and secure mount.
The PTX Model 1 Internal Wiring Bundle
To minimize torsional stress on wires and connectors in a
housing that can spin 360°, the wires run through the
core of the PTX chassis and pan/tilt yoke.
Pictured here are the wires and connectors that emerge
from the open passage on the side of the yoke.
• MICRO HDMI
• SDI OUT
• SDI IN
• 12VDC
The Mini-BNC connectors are used for SDI In and SDI Out
on the Blackmagic Studio Camera 4K, so you just run any
SDI Program Out line from an ATEM switcher to the SDI
IN on the PTX chassis.