![background image](http://html1.mh-extra.com/html/rushworks/ptx-model-1/ptx-model-1_quick-setup-manual_1500570015.webp)
Click the MENU button once to turn it on. The only setting
you’ll be changing, if at all, is the DMX Address.
To change the DMX Address, click the ENTER button
beneath the LED display. You’ll see the first menu item,
DMX Address.
Click the ENTER button again …
… then click the UP or DOWN buttons to increase or
decrease the current Address assignment.
Click the ENTER button a final time to Save the DMX
Address setting.
Note: be sure to set the MODE and DMX/VISCA ID DIP switches on the top base of the
PTX at the same time you set the DMX ID on the front panel. Following is a chart showing
the corresponding camera numbers, DMX Values and DMX/VISCA ID DIP settings.
It’s good practice to set the corresponding DIP switches at the same time you set the DMX ID
for each fixture. The MODE switch settings are discussed on the next page.