and the thread on both the top and bottom of the Marshall
CV-350.
NOTE:
YOU MUST REMOVE THE HANDLE FROM CANON
XA SERIES AND SIMILAR MODELS IN ORDER FOR THE
PTX TO INITIALIZE AND OPERATE PROPERLY.
ALSO REMOVE THE HAND STRAP ON THE RIGHT SIDE OF
THE CAMERA SO IT WILL MOUNT PROPERLY ON THE
TILT CRADLE.
With the PTX powered OFF, tilt the plate forward and
place the thumbscrew into the long adjustment slot on the
tilt plate.
Note: the FRONT of the PTX has the PTX logo sticker on
the yoke. The REAR does not have the sticker.