Rural King RK24 Hydrostatic Operator'S Manual Download Page 88

Page: 88 / 143

5 - 15

Lubrication & Maintenance

Park tractor on level surface, shut-

off engine.
Remove sump plug & drain oil.
Replace and check the sump plug

and refill the engine with oil to the

correct level on the dipstick. (Approx.

2.7ℓ(0.71 US gal).

The grade of oil to be used will de-

pend on the ambient temperature.

See page 5-16, 5-17.
The tractor is shipped from the fac-

tory with 10W/0.

▶

cHanGinG enGine oiL



When changing the oil always

change the filter.



Always use the same oil, as

using different oils or specifi-

cations can cause damage.



Dispose off the old oil as per

local regulations.

iMPortant

Engine Oil Filter

T5O55A

1. Allow the transmission oil to cool.

▶

cHanGinG tHe tranSMiS-

Sion oiL

T45O519h

Level Gauge

T45O50h

T/M Oil Filler

RK24H-영문판-05.indd 15

2018-12-11 오전 8:08:08

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Rural King RK24 Hydrostatic, Operator'S Manual, Page: 88 / 143

Search results

Summary of Contents for RK24 Hydrostatic

Reviews: