Rural King RK24 Hydrostatic Operator'S Manual Download Page 12

Page: 12 / 143

1 - 5

GENERAL INFORMATION

GENERAL CONSTRUCTION

The transmission case, Engine and

Front Axle Support are bolted to-

gether to form a rigid unit.

FRONT AXLE & WHEELS

The 4WD front axle is a center-piv-

ot, reverse Eliot type. The front

wheel drive mechanism is incorpo-

rated as a part of the axle.
The front wheel drive power is taken

off the rear transmission and trans-

mitted to the differential in the front

axle where the power is divided into

right and left and to the respective

final cases.

In the final cases, the transmitted

revolution is reduced by the level

gears to drive the front wheel. The

4WD mechanism with level gears

provides wider steering and greater

durability.

ENGINE

The tractors are fitted with fuel effi

cient engines with 3 cylinders man-

ufactured by Yanmar.

TRANSMISSION WITH HST (HY-

DROSTATIC TRANSMISSION)

The Tractor is fitted with a 2 Range

HST. Speed range by a HIGH-LOW

selector lever.
The tractor has two pedals for for-

ward/reverse control.
Tractors with Independent Power

Take Off are fitted with an electro-

hydraulic Clutch Assy.
The Rear PTO and Mid PTO can be

operated together or separately by

a lever..

BRAKES
RK

tractors are provided with disc

brakes operated by foot pedal. A

parking brake lever is fitted for park

ing.

DESCRIPTION

►

REAR AXLE & WHEELS

This is mounted on ball bearings

and is enclosed in removable hous-

ing which are bolted to the transmis-

sion case. The rim & Disc fitted with

Rear tires are bolted to the outer

flange of Rear Axle.

HYDRAULIC SYSTEM & LINKAGES
RK

Tractors are fitted with Live (i.e.

system is in operation) independent,

Systems.
Three point Linkages can be used

for category 1(N) type of imple-

ments.

STEERING

It consists of Hydrostatic Power

steering system, which has a hy-

draulic cylinder and tandem type hy-

draulic pump.

RK24H-영문판-01.indd 5

2017-03-09 오후 5:43:43

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands

Rural King RK24 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands