Rural King RK24 Hydrostatic Operator'S Manual Download Page 127

Page: 127 / 143

9 -

WARRANTY

▶

WhAT IS COvEREd bY ThIS

WARRANTY?

YANMAR

warrants to the original re-

tail purchaser that a new

YANMAR

TNV common rail series industri-

al engine will be free from defects in

material and/or workmanship for the

duration of the warranty period.
Note:

YANMAR

engines may be

equipped with external components

including, but not limited to: wiring

harnesses, electrical devices, con-

trol panels, radiator, air filters, fuel/

or exhaust systems that are sup-

plied and/or installed by manufactur-

ers other than

YANMAR

. For war-

ranty information on such external

components, please contact the ma-

chine or component manufacturer

directly or see your authorized

YAN-

MAR

dealer or distributor.

This warranty is provided in lieu of

all other warranties, express or im-

plied.

YANMAR

specifically dis-

claims any implied warranties of

merchantability or fitness for a par

ticular purpose, except where such

disclaimer is prohibited by law. If

such disclaimer is prohibited by law,

then implied warranties shall be lim-

ited in duration to the life of the ex-

press warranty.

▶

hOW LONg IS ThE WARRAN-

TY PERIOd?

The

YANMAR

standard limited war-

ranty period runs for a period of

twenty-four (4) months or Two-

thousand(000) engine operation

hours, whichever occurs first. An

extended limited warranty of thir-

ty-six(36) months or three thou-

sand(3000) engine operating hours,

whichever occurs first, is provided

for these specific parts only: the cyl

inder block, cylinder head, crank-

shaft forging, connecting rods, fly-

wheel, flywheel housing, camshaft,

timing gear, and gear case. The

warranty period for both the Stan-

dard limited warranty and the ex-

tended limited warranty (by duration

or operation hours) begins on the

date of delivery to the original retail

purchaser and is valid only until the

applicable warranted duration has

passed or the operation hours are

exceeded, whichever comes first.

YANMAR LIMITEd WARRANTY

1. YANMAR WARRANTIES

RK24H-영문판-09.indd 2

2017-03-09 오후 4:31:14

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands

Rural King RK24 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands