Rural King RK24 Hydrostatic Operator'S Manual Download Page 59

Page: 59 / 143

3 - 14

DESCRIPTION OF TRACTOR CONTROlS

T5O330A

MID PTO

The speed of mid PTO is ,000rpm.

Use the PTO lever to engage.

►

Mid + Rear Rear

Mid

T5O3A

Mid

Rear

The PTO switch must be OFF be-

fore PTO is engaged.
1. Decrease engine speed to near

idle.

. Make sure that PTO switch is

OFF.

3. Engage mid PTO using the PTO

lever.

4. If rear PTO is needed to engage,

shift the PTO lever to correct po-

sition.

5. Turn on the PTO switch.
. Increase engine speed to desired

speed.

Engine RPM

Mid PTO Speed

000 RPM

3000

07 RPM



If operator turns off PTO

switch, rear PTO and mid

PTO are off at once.

IMPORTANT

Do not operate any imple-

ment at a high speed than is

specified for it.

When making adjustments to

the implement stop the en-

gine to avoid serious injury.
When leaving the tractor stop

the engine, and remove the

key. Set the parking brake. .

•

CAUTION

RK24H-영문판-03.indd 14

2017-03-09 오후 2:57:23

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands

Rural King RK24 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands