Rural King RK24 Hydrostatic Operator'S Manual Download Page 64

Page: 64 / 143

3 - 19

DESCRIPTION OF TRACTOR CONTROlS

Only use drawbar to tow and

keep the 3 point linkage in

the raised position when tow-

ing with the drawbar.
Position can create unbal-

ance causing the tractor to

roll-over & result in the death

or serious injury.

•

DANgER

MOUNTINg IMPlEMENT

►

If the PTO is used, remove the safe-

ty cover off the PTO shaft.
Adjust the yoke rod on the lower

links to suit the implement in
use.
Attach the left lower link, then attach

the right lower link using the adjust-

ing handle on the leveling box if re-

quired.
Attach the top link.
Attach the PTO shaft to the tractor if

used, making sure that it is locked in

place.



Do not attach a PTO shaft with

the engine running and ensure

all safety shields are in place.

CAUTION

Rear PTO Shaft Cover

T35O34A

Adjust the check chains to suit the

implement and tighten the locknuts.
To remove an implement reverses

the procedure.

RK24H-영문판-03.indd 19

2017-03-09 오후 2:57:30

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands

Rural King RK24 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands