Rural King RK24 Hydrostatic Operator'S Manual Download Page 55

Page: 55 / 143

3 - 10

DESCRIPTION OF TRACTOR CONTROlS

BRAKE PEDAl

The brake pedal is located on the

LHS of the operator.
It is used for two functions.
- To stop the tractor.
- To release cruise control.

►

PARKINg BRAKE lEVER

Push the brake pedal down while
pulling the parking brake up to en-

gage.
Press the parking brake pedal and

push the brake pedal to release.

►

T5O344A

Brake

Pedal

Parking Brake Lever

Traveling with the parking

brake on will damage the

brakes.

•

IMPORTANT

Perform tight turns only at a

slow safe speeds.
Doing so at a high speed can

cause rollovers and very seri-

ous injury or death.

•
•

CAUTION

SUB gEAR lEVER (RANgE

SHIFT lEVER)

►

SUB GEAR LEVER

Sub Gear Lever

The Sub Gear Lever is lo-

cated on the LHS of the

operator.
Operate the sub gear le-

ver to select the appropri-

ate speed for different ap-

plications.

T5O3A

RK24H-영문판-03.indd 10

2017-03-09 오후 2:57:15

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands

Rural King RK24 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Related manuals for RK24 Hydrostatic

Brands by name

Popular brands