Rural King RK24 Hydrostatic Operator'S Manual Download Page 58

Page: 58 / 143

3 - 13

DESCRIPTION OF TRACTOR CONTROlS

Both of the rear and mid PTO are

provided for variable utility. They

can be engaged simultaneously or

separately at same time.
The engine will not start if PTO

switch is ON position.
The engine will shutoff if the oper-

ator leaves the seat with parking

brake released and PTO engaged.

To avoid damage of transmis-

sion and implement, do not

engage PTO with the engine

running at high speed.

•

CAUTION

3. PTO

Mid + Rear Rear

Mid

T5O3A

T5O39A

REAR PTO

The tractor has one speed PTO (540

rpm). Use the PTO lever to engage.

The PTO switch must be OFF be-

fore PTO is engaged.
1. Decrease engine speed to near

idle.

. Make sure that PTO switch is

OFF.

3. Engage rear PTO using the PTO

lever.

4. Turn on the PTO switch.
5. Increase engine speed to desired

speed.

►

Mid

Rear

Engine RPM

Rear PTO Speed

540 RPM

3000

50 RPM

RK24H-영문판-03.indd 13

2017-03-09 오후 2:57:21

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Brands by name

Popular brands

Rural King RK24 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Brands by name

Popular brands