Rural King RK24 Hydrostatic Operator'S Manual Download Page 72

Page: 72 / 143

4- 7

OPERATION

T45O409A

ENGINE COOLING WATER

►

If the gauge indicates that the en-

gine is running hot, stop the tractor

and check the coolant in the radia-

tor.

Allow the engine to cool down

before opening radiator cap

as serious burns may result

due to hot steam & boiling

water.

•

DANGER

Also check to ensure that the fins

in the radiator core are not clogged

or that the tractor has a broken or

stretched fan belt.

When traveling on public

or farm roads connect both

brake pedals and allow for

the weight of any mounted

implement to ensure that the

unit is not unbalanced.
Also allow for the width when

passing other road users.
Where fitted use the hazard

lights provided.

Strictly follow the local traffic

regulations.
When operating near others

with an implement attached

take particular care to allow

for the width of the implement

and avoid accidents.

•

•
•
•
•

CAUTION

RK24H-영문판-04.indd 7

2017-03-09 오후 3:01:38

Summary of Contents for RK24 Hydrostatic
















































































































































Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Brands by name

Popular brands

Rural King RK24 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK24 Hydrostatic

Reviews:

Brands by name

Popular brands