www.victorruoshui.co.kr
8
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
2 sec., return to Auto Range mode. There is no Auto
Range mode at Frequency and Capacitance range.
3-6. REL: Relative Value Measurement, press the button
to the mode of Relative Value Measurement, press
again to cancel the Relative Value Measurement,
circulated like this. Keep pressing the button more
than 2 seconds to switch to RS232, RS232 symbol
appears on LCD, it indicates the instrument is
getting into the status of data transmission. Keeping
pressing the button more than 2 seconds, RS232
symbol disappears, the data transmission is stopped.
4. Function/range selection knob: select the measuring
function and range
5. 10A current input terminal: Measuring AC/DC 10A
positive input terminal, insert red test lead.
6. uA/mA /
℃
input terminal: Measuring AC/DC
uA/mA and Temperature positive input terminal.
7. COM input terminal: negative input terminal, insert
the black test lead.
8.
input
terminal:
measure
Voltage,
