www.victorruoshui.co.kr
21
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
please select the higher range to complete the
measurement.
Note:
a)
When measuring the in-circuit resistance,Make sure
all the power of the tested circuit has been turned
off and all capacitors are fully discharged.
b)
It will cause the reading incorrect to input any
voltage when measuring the resistance. If the
voltage exceeds 250V, over-range protection
voltage, it is possible to damage the instrument and
endanger the safety of the users.
c) At Range 600Ω,short-circuit the test lead to measure
the wire resistance, and then subtract it from the real
measurement.
Range
Accuracy
Resolution
600Ω
±(0.8%+5d)
0.1Ω
6kΩ
±(0.8%+4d)
1Ω
60kΩ
10Ω
600kΩ
100Ω
6MΩ
1kΩ
60MΩ
±(1.2%+10d)
10kΩ
Open circuit voltage: 400mV. Over range protection:
