www.victorruoshui.co.kr
18
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
“uAmA ”or “10A”input terminal, displayed as the
right picture.
2. Turn the function/range selection knob to current
range, press “SELECT”, switch to AC measurement
mode, then connect the test lead to the tested circuit
in series, the polarity of the red test lead and the
tested current value will be displayed on LCD
simultaneously.
3. If “OL” is displayed on LCD, it indicates the tested
current value has exceeded the present range limit,
please select the higher range to complete the
measurement.
Note:
a)
Do not measure the current
higher than 10A at
Range 10A and higher than 600mA at mA
Range
