www.victorruoshui.co.kr
12
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
switch to DCV measurement mode.
2. The instrument was preset as the Auto Range mode of
DCV measurement, displays
“AUTO” symbol on LCD,
press “RANGE” button
to switch to the Manual
Range mode.
3.Connect the test lead to the
tested circuit
in parallel, the
polarity of the red test lead and
the tested voltage value will be displayed on LCD
simultaneously.
注
Note:
a)
Do not measure the voltage higher than DC 1000V
or AC 750V.
b)
When measuring the high voltage, caution to avoid
electric shock. Cut the connection between the test
lead and tested circuit at once after measurement.
C
）
At the Manual Range mode, if “OL” is displayed on
LCD, it indicates the tested voltage value has
exceeded the present range limit, please select the
