- 19 -
The asset management label is at the lower-right corner of the switch back panel. The label is movable and can be
withdrawn from the device. Users can mark the information such as asset name, category, code and registration date
on the label which helps to improve asset management rate and efficiency.
Figure 1-10 Asset management label of the RG-S6220-24XS
External Interface
The RG-S6220-24XS provides the following interfaces:
USB port: This port can connect with USB memory to save logs, host versions, warnings and other diagnostic
messages. Therefore, it is more convenient to upgrade the software version of the switch on line and save the log
information.
To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the
local USB interface is compatible with most of the USB controllers except some USB flash disks.
Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with
the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host
software uploading.
10/100/1000M RCMI management port: This is an out-band Ethernet port, which uses standard RJ45 connector.
This interface is connected with Ethernet port of a PC to perform program downloading. This interface also
supports DCMI protocol, and users can do remote management and maintenance for the switch through the
interface. Use standard network cable when the interface is connected with the Ethernet port.
When connected through DCMI protocol, the PC needs to install DCMI client.
For detailed functions and application methods of DCMI, please refer to
Configuration Guide.
SFP+ port: There are 24 10G QSFP+ ports, which support optical modules and DAC copper cables, and are
compatible with 1000Base-X.
Indicator
Indicator
Panel
Identification
Status
Meaning
System indicator
Status
Off
The system is not powered up.
Solid red
1) One of the modules of the system fails.
2) The internal temperature exceeds the warning
working temperature, and the switching service
resets.
