- 42 -
Figure 3-7 Removing an M6220 series extension module
Withdraw the extension module uprightly and slowly.
Do not hold the edges of the printed plate or press the components on the printed plate.
Install a baffle on the location where an extension module is removed to ensure normal ventilation and dissipation
and avoid dust in the chassis.
3.6 Installing and Removing a Power Module
Wear anti-static gloves before the following operations.
Installing a RG-M6220-AC460E-F Power Module
1)
Take a new power module out of the package and confirm the input mode and the input parameters of the power
module match the requirements.
2)
Remove the power baffle and take the plane printed with power information as the top panel of the power module.
Hold the handle of the power module with one hand, and hold the end of the power module with the other hand.
Insert it into the chassis along the guide rail uprightly and slowly until a click is heard, and make sure that it is in
good contact with the power slot.
Figure 3-8 Installing a power module
Insert the power module smoothly. Please pay attention to the direction of the power panel to avoid wrong
insertion.
