- 9 -
Notes:
①
Power supply module slot
②
Fan module slot
③
USB2.0 interface
④
Grounding pole
⑤
Asset management label
Asset management label
The asset management label is at the lower-right corner of the switch back panel. The label is movable and can be
withdrawn from the device. Users can mark the information such as asset name, category, code and registration date
on the label which helps to improve asset management rate and efficiency.
Figure 1-9 Asset Management Label of the RG-S6220-48XS4QXS V2.XX
External Interface
The RG-S6220-48XS4QXS V2.XX provides the following interfaces:
Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings
and other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on
line and save the log information.
To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the
local USB interface is compatible with most of the USB controllers except some USB flash disks.
Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with
the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host
software uploading.
10/100/1000M MGMT management port: This is an out-band Ethernet port, which uses standard RJ45 connector.
This interface is connected with Ethernet port of a PC to perform program downloading. Use standard network
cable when the interface is connected with the Ethernet port.
SFP+ port: There are 48 10G QSFP+ ports, which support optical modules and DAC copper cables, and are
compatible with 1000Base-X.
QSFP+ port: There are four 40G QSFP+ ports, which support optical modules and DAC copper cables. This port
can work in 4x10 mode.
Indicator
Indicator
Panel
Identification
Status
Meaning
System indicator
Status
Off
The system is not powered up.
