KT332N Cutting &engraving control system user manual V1.1
50
Figure 8.10.1
8.10.1 Option Box operating
When users modify the parameter of the selection parameter box, first select the parameter, and
then press the OK key. The up and down arrows appear on the right side of the selection
parameter box. As shown in the figure
，
you only need to press the "Up and Down"
key to select other options, and press [ [OK] key confirms the currently selected parameter.
When the cursor moves to "write parameter", press [OK] key to complete the parameter
modification and the parameter takes effect.
8.10.2 Number modification operating
When user modify the numerical parameters, select the parameter box and press the [OK] key,
the cursor appears below the first digit (
),At this time, press the "up and down" key to
modify the number at the cursor position (
）
, For other digits, press the left and right keys
to move the cursor to the digit to be modified and repeat the operation described above
.
If the number of digits required for the parameter setting is greater than the current display digits,
the highest display here is up to ten digits. When you need to set hundreds or more parameters,
just move the cursor to the leftmost side and continue to press the "left direction" key or the
rightmost to press the "right direction" key on the side, other operations are the same as above.
At the same time, if the current number of display digits is greater than the number of digits
required for the parameter, if the highest digit of the current display is thousands
, and
the parameter only needs to set the highest digit as the hundredth, and then set the number of