KT332N Cutting &engraving control system user manual V1.1
42
the Udisk.
<restore para from U disk>: restore the vendor and user parameters from the Udisk.
<upgrade from U disk>: upgrade the controller firmware from the U disk.
8.6.20 Time setting
When the "red selection box" is stopped on the item and press [OK] , the following interface pops
up:
This interface is only displayed when the system is not encrypted. For parameter setting
operations, please refer to Section 8.10.
8.6.21 Authorization Management
When user buy the first product from us, the product should be authorized.
If the current product is not authorized, when the "red selection box" on this item, press [OK] and
the following interface pops up:
Figure 8.6.14-1
Press [OK] , the red selection box selects the first parameter box, and press the [OK] key again
to display the soft keyboard, as shown in the figure: