LFS-PM Series Live Focus System Operating Manual
20
Chapter 4 Test and Run
Test and run is based the RDC6332M cutting controller and the control software is
Metal Cut.
4.1 Distance Controller Test
Before we start the distance controller test and run, the cutting control system and the
distance controller should be wired correctly.
When you want to start a normal testing, the user parameter and vendor parameter
should be configured correctly. Shown as the following:
MetalCut
FILE
VENDOR SETTING
OTHERS
to enable “ENABLE PROTECT”:
MetalCut
VENDOR SETTING
SPECIAL
(the password is rdtsmm)
height
controller type(common)
check follow up(use trigger)
check follow(use trigger).
Shown as following:
