Rugged CCTV Workhorse 120-8, Operating Instructions & User Manual, Page: 85 / 145

84
On the
{Data Setup} -> {Data 1~4} -> {Event} -> {Sound}
menu, select the desired channel
using the
arrow (
STW X
)
buttons and press the
[Select]
button.
To set all channels at the same time, select
{Sound}
and press the
[Select]
button.
On the selection box, select the audio channel using the
arrow(
ST
)
and
[Select]
buttons.
To adjust the audio sensitivity of each channel, select
{Sound}
and press the
[Main Setup]
button.
On the selection box, select the audio channel using the
arrow(
ST
)
and
[Select]
buttons.
D) Pre & Post
This is used to set the duration for recording the video upon the occurrence of an event. The unit is in
seconds. After the duration is set, video is recorded for the defined duration upon the occurrence of
an event.