Rugged CCTV Workhorse 120-8, Operating Instructions & User Manual, Page: 84 / 145

83
To set all channels at the same time, select
{Sound}
and press the
[Select]
button.
On the selection box, set the input port number on the external sensor box using the
arrow
(
ST
)
and
[Select]
buttons.
„
Sensor type setting
On the
{Data Setup} -> {Data 1~4} -> {Event} -> {Sensor}
menu, select the desired channel
and press the
[Main Setup]
button.
On the selection box, set the sensor type using the
arrow (
ST
)
and
[Select]
buttons.
Normal Close (NC)
: Opens in case of incoming signal when closed normally
Normal Open (NO)
: Closes in case of incoming signal when opened normally
C) Sound
Defines the settings for detecting audio input from an external device compatible with the system
The user can set the audio input for two external devices compatible with the system. Once audio
input is detected, the video of the corresponding channel is recorded. Each channel can detect
audio from up to two devices.