Rugged CCTV Workhorse 120-8, Operating Instructions & User Manual, Page: 49 / 145

48
Yellow
Sound is recorded.
Light blue
This shows that recording was done before the time was changed.
Set the time by using the
arrow (
WX ) or numeric buttons or moving the time indicator and press
the
[Select]
button.
Input numbers that are less than ten in two digits using the numeric buttons, e.g., 01 for 1 and 02 for 2.
Viewing the status bar related to time change
1) After the changed folder is searched by the status bar, the bar for the corresponding time
zone is displayed in light blue as shown below:
2) Selecting a changed time causes a list including the updated folder to be displayed as
shown below:
Supported only in multi-channel mode
(3) Minute
Select the time. The recorded video of each channel is then displayed in a minute-unit bar graph.
Define the starting time using the
arrow (
STWX
)
and numeric buttons and click the
[Select]
button.
Input numbers that are less than ten in two digits using the numeric buttons, e.g., 08 for 8 and 09 for 9.