Rugged CCTV Workhorse 120-8, Operating Instructions & User Manual, Page: 109 / 145

108
(4) Password
Go to the
{3. Password}
menu using the
arrow (
ST
)
buttons and press the
[Select]
button.
On the input window, enter the password using the
arrow (
STW X
)
and
[Select]
buttons.
After inputting the data, select
[Save and Exit]
using the
arrow (
STW X
)
buttons or
[Tab]
button
and save the setting by pressing the
[Select]
button.
(5) IP
Go to the
{4. IP}
menu using the
arrow (
ST
)
buttons and press the
[Select]
button.
On the input window, enter the IP using the
arrow (
STW X
)
and
[Select]
buttons.
(6) Directory
Go to the
{5. Directory}
menu using the
arrow (
ST
)
buttons and press the
[Select]
button.
On the input window, enter the directory using the
arrow (
STW X
)
and
[Select]
buttons.
After inputting the data, select
[Save and Exit]
using the
arrow (
STW X
)
buttons or
[Tab]
button
and save the setting by pressing the
[Select]
button.
(7) Execution time
Go to the
{6. Execution Time (Hourly)}
menu using the
arrow (
ST
)
buttons and press the
[Select]
button.
On the input window, enter the execution time using the
arrow (
STW X
)
and
[Select]
buttons.
Only numbers between 1 and 59 are recognized; each number denotes a minute.
Beyond 59 minutes, the following warning message appears:
(8) Maximum Save time
On the
{Storage }
menu, select
{NAS Backup} -> {7. Maximum Save Time}
using the
arrow
(
ST
)
buttons and press the
[Select]
button.
On the selection box, select One Hour or Two Hours using the
arrow (
ST
)
buttons or
[Select]
button.
(9) Minimum capacity
Go to the
{8. Minimum Space}
menu using the
arrow (
ST
)
buttons and press the
[Select]