Rugged CCTV Workhorse 120-8, Operating Instructions & User Manual, Page: 34 / 145

33
4-5-2 Brightness Control
To shift to brightness control mode, press the
[Status]
button as shown below:
Select the channel on the monitoring screen to adjust the brightness.
Adjust the brightness using the
arrow (
W X
)
buttons.
Go to the channel selection window using the
[ESC]
button and adjust the brightness of the
channel video by repeating steps 2 and 3.
After adjusting the brightness of the channel video, press the
[ESC]
button again.
The adjusted brightness is then saved immediately.
4-5-3 Adjusting the Contrast
To shift to contrast control mode, press the
[Status]
button as shown below:
Select the channel on the monitoring screen to adjust the contrast.
Adjust the contrast using
the arrow (
W X
)
buttons.
Go to the channel selection window using the
[ESC]
button and adjust the contrast of the
channel video by repeating steps steps 2 and 3.
After adjusting the contrast of the channel video, press the
[ESC]
button again.
The adjusted contrast is then saved immediately.
4-5-4 Camera Control
ƒ Use Camera Control to control the displayed images by moving the channel screen as shown
below:
To shift to camera control mode, press the
[Status]
button as shown below:
Select the channel on the monitoring screen to control the camera.