Rugged CCTV Workhorse 120-8, Operating Instructions & User Manual, Page: 120 / 145

119
(6) Tour setting
On the
{PTZ Setup}
menu, select the desired channel using the
arrow (
STW X
)
buttons and
press the
[Select]
button.
On the selection box, enable the Tour feature using the
arrow (
ST
)
and
[Select]
buttons.
Preset
Used to move the PTZ camera up, down, right, and left, to zoom in the
image, and to control the focus to save the new setting
Up to eight settings may be defined. Setting numbers between 1 and 8
may be selected.
Tour
Automatically controls the preset PTZ camera according to the
predefined order
Tour 1
is set as 9, and
Tour 2,
as 0.
Preset
maintenance
time Tour
interval (between 5 and 60 seconds)
Example - Tour feature when Tour 1 and Tour 2 are set as follows:
„ When 9 is pressed in PTZ mode:
Changes in the following order: 1 > 7 > 5 > 6; selecting 9
again disables the feature
„ When 0 is pressed in PTZ mode:
Changes in the following order: 3 > 2 > 4 > 8; selecting 0
again disables the feature
Tour1 Tour2
1 3
7 2
5 4
6 8