manualshive.com logo in svg

Rugged CCTV Workhorse 120-8, Operating Instructions & User Manual, Page: 32 / 145

Share
Download
Rugged CCTV Workhorse 120-8 Operating Instructions & User Manual Download Page 32

 

31 

4-5 

 Viewing System Information and Changing the Display Setup 

Workhorse 120-8 displays basic system information through the STATUS OSD to enable the user to 

monitor the real-time screen, view system information, and set the screen. 

 

z

 Selecting 

the 

[Status]

 button causes the following setup menus to be displayed: 

 

Channel selection window 

Activation 
mode 

The channel selection window can be moved. At this time, the border of the 
channel screen is displayed in orange. 

Selection 
mode 

The channel is selected, At this time, the border of the channel screen is 
displayed in blue. 

Viewing a divided screen 

Pressing the 

 buttons in Brightness, Contrast, or Camera Control mode enables 

monitoring the video in Full, 1, 4, or 9-divided screen. 

 

4-5-1  Viewing System Information  

 

 

Summary of Contents for Workhorse 120-8


















































































































































Reviews:

No comments