RTS OMNEO OEI-2, User Manual, Page: 19 / 40

OEI-2 Installation 19
Bosch Security Systems, Inc. Technical Manual F.01U.287.527 Rev. 01
2.
On the front of the OEI-2 unit, connect J1 or J2 to the Frame connector on the keypanel.
3.
Connect one end of the power supply to the OEI-2 and the other end to the wall outlet .
The OEI-2 powers on. On initial power up, only the Power LED is seen.
NOTE: If you need to mount the power supply (P/N RP_OEI_PS_BRK), see “Optional Power Supply Mount” on
page 37.
4.
Using IPedit or AZedit, configure the OMI with the OEI-2 . See “Configure an OEI-2 Using AZedit” on page 21 or
“Configure an OEI-2 Using IPedit” on page 23.