RTS OMNEO OEI-2, User Manual, Page: 31 / 40

OEI-2 Configuration 31
Bosch Security Systems, Inc. Technical Manual F.01U.287.527 Rev. 01
17.
Tap PGM .
The focus moves to the next character in the device name.
NOTE: You can also use the volume control to move the cursor position to the left and right.
18.
Repeat steps 19 and 20 until the Domain Name is entered.
CLR deletes the current character. 0 can be used to insert a character at the current position. Scroll up/scroll down
can also be used to move the current cursor position.
19.
Tap FWD to exit.
20.
Select Save Cfg to store the OMNEO Setup settings.
Mode 1 - Audio Direction Selection
Audio Direction Selection mode allows the user to change the direction of the audio on the OEI-2. This means the audio
output port can be changed to become the audio input port for their respective ports. This allows the user to connect audio
channels directly to an AIO-16 breakout panel or to the Zeus III ports.
By default, the OEI-2 channels receive audio from the matrix. However, you can modify the configuration to send audio
to the matrix. This is done using the IPedit software application.
Mode 1a - Audio on CH1 and Audio+Data on CH2
FIGURE 11.
Audio Direction Mode
FIGURE 12.
Audio Direction Mode – Channel 1