RTS OMNEO OEI-2, User Manual, Page: 22 / 40

22 Configuration OEI-2
Bosch Security Systems, Inc. Technical Manual F.01U.287.527 Rev. 01
4.
From the pop-up menu, select OMNEO Configuration .
The OMNEO Configuration window appears .
5.
Verify the Settings for OMNEO Card information is correct.
6.
From the Local Channel drop down list, select the channel you want to use to communicate from the OMI to the
OEI-2 device.
NOTE: Non-allocated channels appear with an asterisk next to them.
7.
Select the Browse icon to open the Discovered Devices window from which you can choose the device.
The Partner IP Address field automatically populates.
OR
In the Partner Device Name field, enter the name of the
OEI-2 you want to communicate with.
8.
From the Partner Device Type drop down menu, select OEI-2 .
NOTE: If the system detects the type of device it is, the Partner Device Type automatically populates.
9.
From the Partner Channel drop down menu, select the channel on the OEI-2 to which the OMI communicates.
10.
Click Apply .