RTS OMNEO OEI-2, User Manual, Page: 26 / 40

26 Configuration OEI-2
Bosch Security Systems, Inc. Technical Manual F.01U.287.527 Rev. 01
LED Indicators
Power Indicator LED
The Power Indicator LED, located on the lower left corner of the OEI-2 front panel, indicates if power is being supplied to
the unit or if there is a communication failure between the OEI-2 and the OMI.
When power is supplied to the unit, the power indicator LED is a constant green.
NORMAL Operation
In Normal operation mode the OEI-2 unit displays LED indication for channel 1 and channel 2.
The channel indicator LEDs are as follows:
Channel 1 is represented by the LED 0
Channel 2 is represented by the LED 1
When blinking is seen on LED 0 or LED 1, this indicates the keypanels are connected and are configured.
FIGURE 7.
Powered OEI-2 Unit
FIGURE 8.
Keypanels Connected and Configured