RTS OMNEO OEI-2, User Manual, Page: 21 / 40

Bosch Security Systems, Inc.
Technical Manual
F.01U.287.527 Rev. 01
CHAPTER 3
Configuration
OEI-2 Power Cycle
The OEI-2 has an external switch primarily used to power cycle the unit without disrupting power to the unit. For more
information, see “Power On Reset” on page 36.
To power cycle the OEI-2 unit , do the following:
1.
Using a straightened paperclip, press and hold the MODE SEL button for 10 seconds .
The POWER and MODE LEDs start blinking .
1.
Remove the straightened paperclip from the MODE SEL button.
The POWER LED turns off. The OEI-2 is power cycled .
Software Configuration
Configure an OEI-2 Using AZedit
To configure an OEI-2 with an OMI card using AZedit , do the following:
1.
Start AZedit .
2.
From the Status menu, select I/O Cards .
The I/O Card Status window appears displaying a list of recognized cards.
3.
Right-click an OMI card .
A pop-up menu appears.