52 KP-32 Menu System
KP-32 User Manual
Bosch Security Systems, Inc.
User Manual
F.01U.193.253
Rev. 16
Service Menu, Mod Assign
NOTE:
Normally, this is a service adjustment that is required only when replacing a key and display module. It may also
be required if for some reason, the key assignments, as displayed in AZedit, appear to be in the wrong positions
on the keypanel or expansion panel.
The KP-32 and EKP-32 use module ID numbers (Mod ID numbers) to define the address of each key and display module. By
default, Mod 1 is always assigned to the right half of the KP-32 and this never changes, since this module has the keypad and
is unique. However, the rest of the modules are identical. When replacing any of these modules, you may have to reset the
Mod ID number as follows:
1.
Select
Mod Assign
and tap
PGM
.
Cancel? displays. To exit the procedure without making changes, tap PGM
.
2.
All of the alphanumeric displays, except Mod 1. Assign the Mod IDs as shown in the figure. Repeat the procedure for
each module.
NOTE:
You do not need to run Save Cfg after changing Mod assignments.
Service Menu, Output Level
Allows the adjustment of the nominal audio output level to the matrix from 0 dB to +8 dB.
1.
Select
Outp Level
, then tap
PGM
.
+8dB displays.
decreases the level
or
increase the level
.
2.
Tap
PGM
.
3.
Tap
CLR
to exit.
4.
Run
Service Menu, Save Cfg
, to store the Output Level settings.
Summary of Contents for EKP-32
