RTS EKP-32, User Instructions

Page: 49 / 120

KP-32 User Manual KP-32 Menu System 37
Bosch Security Systems, Inc. User Manual F.01U.193.253 Rev. 16
Display Menu, Panel ID
Panel ID displays the calculated port number that the keypanel is connected to. The calculation is based on the data group that
the keypanel is connected to, along with the Address switch setting on the keypanel. If the Address switch is incorrectly set,
the wrong Panel ID displays. Panel ID also displays the port alpha in brackets if the port is not scroll restricted.
Display Menu, Version
Displays the firmware version of the keypanel.
NOTE: For firmware upgrades, contact your intercom system dealer. The KP-32 firmware can be upgraded from AZedit.
For more information, see the AZedit user manual.
Menu System, Key Assign Menu
Use this menu to assign intercom keys, to adjust listen levels for point-to-point keys and party line keys, and to assign setup
pages.
General Procedure to use the Key Assign Menu
1.
Clear the Call waiting window if necessary, by tapping upward one or more time on the Call waiting key.
2.
Tap Menu
3.
Tap

or

to scroll down to the Key Assign menu.
4.
Tap PGM or FWD to enter the menu.
NOTE: If you do not have a trunking intercom system, skip to step 6.
5.
Remote key assignment only (trunking systems only): If your intercom system is configured for trunking, Matrix
displays in the
Call waiting window. You must select a remote intercom matrix before assigning intercom keys to
destinations in that matrix. You do not need to select an intercom matrix if you are assigning keys in your own
intercom system. Also, do not select an intercom matrix if you are assigning auto functions or setup pages, or if you
are changing listen gains for remote point-to-point keys or remote party line keys. Select a matrix as follows:
Press FWD or PGM to access the Matrix list.
Press

or

to locate the desired matrix.
Press FWD or PGM to select a matrix. Wait may display while the scroll lists for that matrix are
loading.
Pt-to-Pt should now display in the Call waiting window (both for local and remote key assignment). This is the list of
available point-to-point key assignments.
6.
Press

or

to select a different list as follows:
PT-to-PT Assign a key to talk/listen to another intercom port.
Party Line Assign a key to talk/listen to a party line.
IFB: Assign a key to talk/listen to an IFB.
Spcl List: Assign a key to talk/listen to a special list.
Sys Relay: Assign a key to activate a relay or GPI output.
Camera ISO: Assign a key to talk/listen to an ISO.