RTS EKP-32 Page 2 User Instructions Download | Manualshive

Page: 2 / 120

background image

Bosch Security Systems, Inc.

User Manual

F.01U.193.253

Rev. 16

ii

KP-32 User Manual

P

ROPRIETARY

N

OTICE

The product information and design disclosed herein were origi-
nated by and are the property of Bosch Security Systems, Inc.
Bosch reserves all patent, proprietary design, manufacturing, repro-
duction, use and sales rights thereto, and to any article disclosed
therein, except to the extent rights are expressly granted to others.

C

OPYRIGHT

N

OTICE

Copyright 2011 by Bosch Security Systems, Inc. All rights
reserved. Reproduction, in whole or in part, without prior written
permission from Bosch is prohibited.

*All other trademarks are property of their respective owners.

W

ARRANTY

AND

S

ERVICE

I

NFORMATION

For warranty and service information, refer to the appropriate web
site below:

RTS ............................................... www.rtsintercoms.com/warranty

RTSTW ..................................................... www.rtstw.com/warranty

AudioCom................................. www.telexaudiocom.com/warranty

RadioCom .................................. www.telexradiocom.com/warranty

Headsets ................................ www.intercomheadsets.com/warranty

C

USTOMER

S

UPPORT

Technical questions should be directed to:

Customer Service Department
Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 USA
Telephone: 877-863-4169
Fax: 800-323-0498
[email protected]

T

ECHNICAL

Q

UESTIONS

EMEA

Bosch Security Systems Technical Support EMEA

http://www.rtsintercoms.com/contact_main.php

D

ISCLAIMER

The manufacturer of the equipment described herein makes
no expressed or implied warranty with respect to anything
contained in this manual and shall not be held liable for any
implied warranties of fitness for a particular application or
for any indirect, special, or consequential damages. The
information contained herein is subject to change without
prior notice and shall not be construed as an expressed or
implied commitment on the part of the manufacturer.

THE LIGHTNING
FLASH AND
ARROWHEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.

CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER. NO USER-
SERVICABLE PARTS
INSIDE. REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.

SEE MARKING ON BOTTOM/BACK OF PRODUCT.

WARNING

: APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR

SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.

WARNING

: THE MAIN POWER PLUG MUST REMAIN READILY OPERABLE.

CAUTION

: TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING OF

THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED.

WARNING

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPRATUS TO RAIN OR MOISTURE.

WARNING

: TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY

ATTACHED TO THE FLOOR/WALL/RACK IN ACCORDANCE WITH THE
INSTALLATION INSTRUCTIONS.

This product is AC only.

«
1
2
3
4
...
»

Summary of Contents for EKP-32

























































































































Reviews:

No comments

Related manuals for EKP-32

Brand: Samsung Pages: 60

Brand: Samsung Pages: 28

Brand: Samsung Pages: 76

Brand: Samsung Pages: 2

Brand: Samsung Pages: 106

Brand: Samsung Pages: 32

Brand: Samsung Pages: 24

Brand: Samsung Pages: 64

Brand: Samsung Pages: 32

Brand: Samsung Pages: 40

Brand: Samsung Pages: 31

Brand: Samsung Pages: 22

Brand: Samsung Pages: 150

Brand: Samsung Pages: 60

Brand: Samsung Pages: 23

Harman/Kardon HW-N850

Brand: Samsung Pages: 134

Brand: Gardena Pages: 4

Brand: JBL Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands