RTS EKP-32 User Instructions Download Page 15 | Manualshive

Page: 15 / 120

background image

Bosch Security Systems, Inc.

User Manual

F.01U.193.253

Rev. 16

CHAPTER 1

Introduction

Description

The RTS Model KP-32 Keypanel fits in a standard 19" rack and is two (2) rack spaces high. It has 32 lever keys: 30 keys are
for intercom talk/listen assignment; one (1) key is for call waiting response; and one (1) key is for headset/microphone/
program selection and volume setup. The KP-32 combines all of the programmable features of the KP9X Series Keypanels
and the KP-12 Keypanel. It adds significant new features such as digital signal processing and binaural headset operation with
left/right assignment of audio signals. The KP-32 also introduces large, super-bright, long-life fluorescent displays with
adjustable brightness control, making it suitable for all types of ambient lighting from direct sunlight to darkness.

Features

Super-bright, fluorescent displays:

Provide much better visibility and usable life than LCD displays. A display saver mode

with programmable scrolling message extends display life and conserves power during periods of inactivity.

32 lever keys, with 30 keys available for full talk/listen configuration:

Doubles the number of channels over the KP9X

series keypanels. Keys support both latching (hands-free) and momentary (push-to-talk) operation.

Enhanced programming keypad:

Provides the complete KP9X keypad sequences, plus new keypad sequences, plus an

extensive scrollable menu system. Menus include helpful prompts to walk the user through setup.

Only 90mm deep behind the front panel (approximately 130mm with connectors):

Perfect for consoles, OB vans, etc.

Digital Signal Processing:

Improves microphone voice activation and limiting. Adds new mixing, metering, and filtering

capabilities.

Binaural (5-pin) Headset Connector:

Works with the

DSP

(Digital Signal Processing) mixing feature. Lets you

independently assign intercom, microphone, and program audio to left or right headphone.

NOTE:

Monaural (4-pin) connector available as an option. For monaural operation, the mixer lets you select which items

are monitored in the headphones.

Easy upgrades:

Firmware updates can be received via the internet, for example, and then downloaded to the KP-32 via the

intercom connection. Ready for future communication enhancements, including coax, fiber, and ISDN.

«
...
13
14
15
16
17
...
»

Summary of Contents for EKP-32

























































































































Reviews:

No comments

Related manuals for EKP-32

WIZARD ELEGANCE IP

Brand: Fasttel Pages: 14

Brand: WaterLogic Pages: 69

MCX-A10 - MusicCAST Network Audio Player

Brand: Yamaha Pages: 56

Brand: Discount Car Stereo Pages: 5

Brand: Niko Pages: 48

Brand: JBL Pages: 157

Brand: Induction Dynamics Pages: 14

Loft Universal 3399

Brand: Fermax Pages: 2

Brand: Montarbo Pages: 15

Brand: THOMSON Pages: 63

Brand: KOCOM Pages: 2

Pro Audio DK88T

Brand: Music & Lights Pages: 2

NS-2024 - 2.0 SYSTEM

Brand: Insignia Pages: 24

Brand: ICP DAS USA Pages: 8

Brand: POWERSTIXX Pages: 36

Braukmann HS10S

Brand: resideo Pages: 38

Brand: PRASTEL Pages: 20

Brand: CAME Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands