RTS EKP-32, User Instructions

Page: 51 / 120

KP-32 User Manual KP-32 Menu System 39
Bosch Security Systems, Inc. User Manual F.01U.193.253 Rev. 16
Key Assign Menu, Matrix
Matrix appears only for trunked intercom systems. You must select a remote intercom matrix before assigning intercom keys
to destinations in that matrix. You do not need to select matrix to assign keys to destinations in your own matrix. You also do
not need to select a matrix when assigning an auto function to a key.
Key Assign Menu, Pt-to-Pt
Assigns a key that talks or listens to another intercom port. Note that some pt-to-pt destinations may be non-keypanel devices
that cannot activate talk and listen paths. Therefore, if you want full communication, you may need to assign both talk and
listen on the key.
Key Assign Menu, Party Line
Assigns a key that talks and/or listens to a party line. The key has no effect until members have been assigned to the party line
in AZedit. Note that party lines members are usually non-keypanel devices that cannot activate talk and listen paths.
Therefore, if you want full communication with the party line, you must assign both talk and listen on the key. If all
communications are normally be 2-way, you may wish to assign the key as Talk + auto listen.
Key Assign Menu, IFB
By default, all IFBs are restricted and you Not Avail displays when you attempt to select this item. To see IFBs you must check
the appropriate Scroll Enable check boxes in AZedit.
Key Assign Menu, Spcl List
Assigns a key that talks and/or listens to a special list. The key has no effect until members have been assigned to the special
list in AZedit. Note that some or all special list members may be non-keypanel devices that cannot themselves activate talk and
listen paths. Therefore, if you want full communication with all members of the special list, you may need to assign both talk
and listen on the key.
Key Assign Menu, Sys Relay
Sys Relay refers to any of several types of control devices that can exist in the intercom system, including:
The 8 GPI outputs from an ADAM Frame (J11 on the XCP-ADAM-MC Breakout Panel).
The 8 GPI outputs of an ADAM CS frame (J903 on the ADAM CS back panel).
The relay outputs of an FR9528 Relay Frame (RELAY OUTPUTS connector on the FR9528 back
panel).
The 16 GPI outputs of a UIO-256 Universal Input/Output Frame (J5 on the UIO-256 back panel).
Key Assign Menu, Camera ISO
By default, all ISOs are restricted and Not Avail displays when you attempt to select this item. To see ISOs you must check the
appropriate Scroll Enable check boxes in AZedit.
Key Assign Menu, UPL Resrc
By default, all UPL resources are restricted and Not Avail displays when you attempt to select this item. To see UPL resources
you must check the appropriate Scroll Enable check boxes in AZedit. (In the AZedit System menu, select UPL Resources.
Then enter check marks in the appropriate Scroll Enable boxes.)