RTS EKP-32, User Instructions, Page: 54 / 120

42 KP-32 Menu System KP-32 User Manual
Bosch Security Systems, Inc.
User Manual
F.01U.193.253 Rev. 16
Key Option Menu
Key Option Menu, Auto Dial
Use this menu item to store auto dial numbers.
1.
Select Auto Dial .
2.
Tap PGM .

Phone#? displays .
3.
Tap the number keys .

The numbers scroll in the Call waiting window.
NOTE: To insert a pause at any time, tap CLR 9 9 . For example, you may have to insert a pause after dialing 9 to
get an outside line.
4.
Tap FWD (Do not tap PGM !).

A-Dial #1 displays (store auto dial number 1).
NOTE: To store a different auto dial number, press
¬¬
or
ƒƒ
to select the desired auto dial number.
5.
Tap PGM .

XX# displays (where XX = the auto dial number you selected).
6.
Run Service Menu, Save Cfg , to store auto dial numbers.
Key Option Menu, Chime
You can add a chime tone to any key for incoming call announcement. The chime tone activates for about five (5) seconds
after a call is received.
1.
Select Chime , then tap PGM .
2.
Tap any keys where you want to add a chime tone.

Both LEDs light red for the selected keys.
3.
Tap CLR to exit.
4.
Run Service Menu, Save Cfg, to store Chime settings.
NOTE: The chime option continues on a key even if you change the key assignment.
Removing the chime option from a key
Repeat the procedure to add chime, but tap any keys where the LEDs are lit red to turn them off. Run Save Cfg to store the
changes.
Key Option Menu, Key Groups
You can set up a key group, so that when you activate one key (the master key) all keys in the group activates. Up to 4 key
groups can be set up.
1.
Select Key Groups , then tap PGM .

Group 1 displays. To select a different group, press

or

.
2.
Tap PGM .

Tap Master displays. The master key is the key that you press to activate the group.
3.
Tap the intercom key you want to use as the master.

Both LEDs next to the key lights red . After you select the master key, Tap Slaves displays. Slave keys are the keys that
activate along with the master key.
4.
Tap one or more keys to select them as slave keys.

Both LEDs lights green for each key that is selected. You can tap a key again to remove it from the key group.