RTI TheaterTouch T2, User'S Manual And Programming Manual

Page: 48 / 118

TheaterTouch System Controller
38
The default settings for Parity, Data Bits and Stop Bits should work in most cases if
not listed in the equipments owners manual. However, you will need at least the
Baud Rate and Command String for that particular piece of equipment and the
command you are to execute.
After you have set the desired parameters and entered the command string, drag the
RS-232 icon from the lower right to the macro display on the left. Release the mouse
button at the location where you would like to add the RS-232 step.
Double-click the RS-232 command step in the macro if you need to edit any of the
parameters or to change which IRF-6 the command is output if you are using more
than one.
The Time Delay step causes the macro to pause for the time
specified by the Delay Time spin box. The time can be adjusted from 0.1 to 9.9
seconds. After you have set your desired delay time, drag the Time Delay icon from
the lower right to the macro display on the left.
Release the mouse button at the location where you would like to add the time delay
step.