RTI TheaterTouch T2 User'S Manual And Programming Manual Download Page 44

Page: 44 / 118

TheaterTouch System Controller

HOW TO SELECT BUTTONS

The

Select Button

tool

is used to select buttons for cutting, copying, moving,

resizing, or property editing. When buttons are selected, they are painted in red.

To select a single button or a group of buttons next to each other:

1. Click

the

Select Button

tool

on the

Tool Palette.

2. Place the mouse over one corner of the button(s) and click the left mouse

button.

3. Draw a rectangle around the buttons you wish to select in the design

window (either in the touchscreen grid or the keypad buttons).

To select multiple buttons at one time that are not next to each other:

1. Click

the

Select Button

tool

on the

Tool Palette.

2. Hold down the

Ctrl

key on your keyboard.

3. Click the buttons you wish to select (either in the touchscreen grid or the

keypad buttons).

Note:

Many

TheaterTouch Designer

commands can be used on selections as well as

individual buttons. Click the right mouse button on a selection for a list of available
commands.

HOW TO CUT OR COPY BUTTONS

1. Use

the

Select Button

tool

from the

Tool Palette

to select the

button(s).

2. Choose either the

Cut Command

or the

Copy Command

from the

toolbar.

3. The button(s) are now on the clipboard.

HOW TO PASTE BUTTONS

1. Select the page you want to paste the button(s) on from the page list.

2. Choose

the

Paste Command

from the

Toolbar

3. Drag the button(s) to the proper place on the page.

Summary of Contents for TheaterTouch T2























































































































Search results

Summary of Contents for TheaterTouch T2

Reviews:

Related manuals for TheaterTouch T2

Brands by name

Popular brands

RTI TheaterTouch T2, User'S Manual And Programming Manual

Search results

Summary of Contents for TheaterTouch T2

Reviews:

Related manuals for TheaterTouch T2

Brands by name

Popular brands