48
Doc. No.
:
P30001PE0101-07
10.
Barcode reader (optional)
The barcode reader is preset to read the following types of barcodes:
■
Code 39
■
Code 128
■
QR Code
■
Data Matrix
Press the button on the inner side of the barcode reader handle to read a barcode
and focus red light toward the scanned barcode.
Hold the barcode reader in front of the barcode approximately 20 mm away.
(depending on a barcode size, type and quality)
A beep sound confirms that the barcode has been read.
The barcode will be displayed on the screen.
11.
Report file
The magLEAD 12gC generates a report file during the protocol run.
This report file contains the fields described in the table below.
Note
For generating and sending a report, confirm that the serial port has been
properly set up. Refer to section 9.3.3.
Up to 10 report files can be stored temporarily on the magLEAD 12gC instrument.
When this maximum has been reached, the oldest report file must be deleted
before additional reports can be saved.
The following screen appears:
(refer to section 8.3)
Press “1” to delete the oldest report file and continue the protocol run.
Alternatively, press “ESC” to abort the protocol run.
Caution: Memory full
Oldest report file
will be erased
1:Cont ESC:abort run