38
Doc. No.
：
P30001PE0101-07
9.
Manual Operation
9.1.
Manual Screen
Press the “2” key from the MENU Screen to display the Manual Screen. Press the
ESC key from the Manual Screen to return to the MENU Screen.
Manual Screen
9.1.1.
Home Screen
Press the “1” key from the Manual Screen to display the Home Screen. From the
Home Screen, you can select the homing operation of an individual axis or all axes.
・
“1” key
：
Homes the Y-Axis
・
“2” key
：
Homes the Z-Axis
・
“3” key
：
Homes the P-Axis
・
“4” key
：
Homes the M-Axis
・
“0” key
：
Home all Axes
・
“ESC” key
：
Returns to the previous screen
The following screen appears.
“Axis” indicates either the ALL, Y, Z, P, or M function.
Press “START” to perform the “home axis” operation or press “ESC” to return to
the previous screen.
During this operation, the following screen will appear:
DD MM YYYY HH:MM
START:Run 1:UV
2:Man 3:Test 4:Setup
Key:START,1,2,3,4
MANUAL OPERATION
1:Home 2:Return Tip
3:Clean 4:Resend
Key:1,2,3,4,ESC
MANUAL OPERATION
Home axis 0:ALL
1:Y 2:Z 3:P 4:M
Key:0,1,2,3,4,ESC
MANUAL OPERATION
Home axis Axis
START:Run
Key:START,ESC
